Posts Tagged ‘lamp’

h1

Inner resources

July 25, 2016

It seems like a shockingly long time since I posted here. I was busy with other things for awhile there, but really I just haven’t felt like I had anything much to say. I’ve been a bit bored, or as John Berryman’s (or Henry’s) mother would have it, lacking in “Inner Resources.”*

Still, I’ve kept up the lamp making, in between and around. But all the new ones are variations to one degree or another on old projects. Which doesn’t mean they haven’t been enjoyable – just not thrilling the way coming up with something really new is.

And that’s a dilemma. As one gets better at a thing, I think, it gets harder to find a challenge; the risks get less risky. So the glow that goes with finishing a piece gets dimmer and shorter lived.

I suppose that’s why people carp about “process” being the important thing. But to me that always sounds like glorifying drudgery. Competence is one thing. Routine is another: inevitable, but deadly. Essentially entropy.

I don’t know where I’m going here. I’d like to think there’s something on the far side of this void, or fog, or wall, but I can’t make anything out from the spot where I’m standing.

So on that cheery note, here’s what I’ve made over the past couple of months.

Not Just a Cigar Box accent lamp with LED bulb

Not Just a Cigar Box accent lamp with LED bulb

*Dream Song 14, one of my all-time favorite poems.

h1

A tale of two whimsies

November 22, 2015

Back when I was taking writing classes, I had a teacher who would say about a piece he felt wasn’t quite working, “Leave it on the desk.”

It was good advice – not that I always took it. But I find it applies to making lamps at least as much as to poetry. I’ve been working on a couple of lamps for a few weeks now – not because they’re so complicated as just that they’ve been a bit stubborn.

This first one came together fairly easily, except that the piece I’d originally intended to use as a shade – a domed but shallow lid from something or other – just didn’t work with the cocktail pitcher base. So I went looking online for an alternative, found one, bought it, and made a shade of it. And then the lamp squatted on my dining table, making me wince inside every time I looked at it.

Finally, last weekend I found a stainless steel colander at my local Goodwill, and after a bit of dithering, got it, reasoning that I’d eventually use it for something. A few days later I found the time to drill out the center hole, and tried it on the lamp…and OMG the relief. It worked so much better in every way.

The other one was less problematic, but still kind of balky. I’d bought a nice Ford hubcap earlier this year, and when I stumbled on a listing for a space-age Presto percolator, I knew it was just the thing. So I bought it, only to have my payment returned immediately: the seller had already sold it but hadn’t taken the Etsy listing down. So I went to eBay, reasoning that there had to be more of them.

And there were. I chose one, but when it arrived a few days later, one of the plastic feet had been smashed to bits in transit. The coffee pot still stood up though, so I figured I could repair the foot well enough, and that would be easier than hassling with a return.

So, Superglue and tweezers, and a Sharpie for touchups, and it worked. Setting the bubbler in the hubcap took awhile, mostly because my cheap hole-saw attachment was worn to nubs. Wiring the switch was a little trickier than I’d anticipated, due to tight spacing, but not too bad. No, what fought me most was getting the shade to sit straight. Sigh. But in the end all was well.

Ford Presto coffee pot lamp

Ford Presto coffee pot lamp

Both Ford and Mimsie are available for adoption in my Etsy shop. Happy Thanksgiving!

h1

Hard drives’ night

October 17, 2015

Some weeks back, a gentleman contacted me through this website with an unusual request. He had a couple of computer hard drives, circa 1980s, that he wanted made into a lamp.

He had no ideas for the design, and very little in the way of requirements, so I pretty much had free rein—something I tend to struggle with. But I was coming up on one of those birthdays that cause one to stop and tally things up, and admit to one’s shortfalls. So I needed the distraction of a challenge.

Of course, it turned out a bit more than I’d bargained for.

Ordinarily, the object that is the jumping off point for a project largely dictates the rest of the form. But the drives, when disassembled, offered a plethora of choices with no clear direction—cases and circuit boards, mirror-finish metal platters, spindles and read/write heads, along with other assorted bits and pieces—none of which seemed to speak to one another, at least in lamp terms.

After toying for over a week with the notion of a box with a light inside and sides made (somehow) of platters and boards (but never really falling in love with the idea), one evening I fell asleep imagining a tower of platters, floating around a glowing tube. And the next morning I awoke with an idea of how it might be done.

Measurements and much online window shopping followed, until I came up with what seemed like a viable plan. Although I wasn’t sure it would work, I decided to take the chance that I could figure something out if my original scheme failed.

It almost did, too.

The fit of the parts was much more restrictive than I typically deal with, and the materials were ones I had no experience with. Also, most of the time connections in lamps can be undone and redone as needed. But for this, I had only once chance to get it right—and once I started I had to continue. So it was nerve-wracking enough already. Then when the day came to construct the “shade,” the temperature was in the 90s. So there I was, in my kitchen, improvising on the fly when method A didn’t work, swinging a hammer, bleeding from an injury I still don’t know how I got, swearing and sweating like a sailor. Talk about black moods.

In the end though, it came out all right. I got to make something completely different. My customer thinks it’s “awesome.” And the way it plays with light is a magic trick I hadn’t anticipated at all.

Seagate Tower hard drive lamp

Seagate Tower hard drive lamp


Want something custom made? Drop me a line.

h1

Disappearing act

August 3, 2015

Across the street from my dentist’s office is a thrift shop. It closes at 3:00, when I have my biannual cleaning, so I go a bit early to run through the shop. Once in awhile I even find something.

Case in point: last fall they had a really nice dual-socket vintage floor lamp – crusty-dusty and not working, but all the parts were original. And it was marked down to half its already silly price. So I grabbed it.

Then it stood in my living room for eight months or so while I thought about what to do with it.

OK, not entirely true. Actually, fairly shortly after buying the lamp, I found a cute (not cheap) birdcage (on eBay) that I thought I’d make into a hanging light. But soon after it arrived I realized it was right size to be a shade for the lamp.

Then I thought for several months about how to join them and how much I wanted to modify the pieces. The cage was rectangular (at the bottom), so I was pretty sure I wanted to line it, like earlier lamps I’d made. But I was stumped on the design.

I considered some kind of collage like I’ve done before, or something with sheet music. The last idea I considered was a wavering line of tiny pelicans that would be invisible when the light was off. Then at some point I thought feathers.

I’d figured out how to attach the birdcage, what to replace its too-far-gone finial with, and how to get the height right. So it was downhill from there.

Well, sort of.

Cutting out the feathers was fun, in a tedious, trial-and-error way. Measuring, cutting, dyeing, and laminating the various layers took a half-hour or so a day over the better part of a week. And then I had to figure out how to join the panels and how to attach the lining to the cage – which didn’t so much come to me in a dream as it was just there when I woke up one morning. And in between I finally got to buy the big reeded beads I’d been hankering for awhile back but had forgotten about.

Fast-forward a couple of weeks, and…

The Thing with Feathers

The Thing with Feathers

So she’s a petite thing, but bottom-heavy, a good height for a reading lamp, with a great reveal. With the right light bulbs she’ll even throw a spidery shadow on the ceiling that’s a sort of inverse of the feathers. Let me know if you want more information.

Hope is the thing with feathers
That perches in the soul,
And sings the tune without the words,
And never stops at all…

-Emily Dickinson

h1

Chrome is where the heart is

May 1, 2015

Let’s face it – humans are just big, fleshy magpies. We love shiny stuff: gold, diamonds, flashy cars, fancy watches, movie stars. The glossier and glitzier, the better.

Rosie in Couture - chrome coffeemaker lamp with stainless steel shade

Rosie in Couture – chrome coffeemaker lamp with stainless steel shade

So why should lamps be different? Why are so many lamps understated? Why are they so afraid (as a friend put it) to say, “Look at Me. I’m a Lamp!”

I’ve found the shiny ones tend to sell faster than the more modest ones. So I’m never worried when I find a chrome appliance that it’s going to be hanging around forever. Nope. They find a home soon.

This means, if you know someone who’s looking for a stellar statement for their bedroom, desk, or foyer – or if you are that someone – grab this gewgaw while you can. You may not get another chance (or not until the next gleaming darling comes my way).

This slideshow requires JavaScript.

h1

The spirit is willing

March 28, 2015

Madame Blavatsky coffee pot lamp

Madame Blavatsky coffee pot lamp


So here’s my latest coffee pot lamp, an ethereal little number named for a 19th-century Ukrainian-born medium. The “shade” originally held a glass serving bowl that’s now gracing a friend’s kitchen, and the percolator came from eBay.

Connecting the bubbler to the top of the shade was the biggest challenge, and required a piece from another coffee pot that was the victim of a screwup by the USPS – which is a long, sad story I won’t go into here.

Anyway, Madame B. is just waiting around for someone to give her a forever home. You can visit and/or adopt at my Etsy shop.

This slideshow requires JavaScript.

h1

Downtime roundup

March 4, 2015

It’s been awhile since I’ve made anything new, and that’s starting to wear away at me. Thankfully, I’ve been acquiring many new things to play with, as well as a slew of parts, so I should start cranking away again soon.

Coming attractions:

Note that links are to similar examples, not the things themselves.

In addition to shopping, I recently did an interview with the Krrb blog. I now have pieces at two shops in Oakland: Lost & Found and SwapShop. And after six years on Etsy (already?!), I’ve sold well over 100 lamps, there and elsewhere.

Finally, I’m looking forward to having lamps again this year at the Albany Film Fest Gala, in its new location at Sam’s Log Cabin.

And now I’ll confess to a fib I committed above: I made a simple colander light for a customer just last weekend.